 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 4 Slot Ethernet Based IP DSL Access om Multiplexer 12000 .c IP DSLAM for Central Office/ Ethernet-based U 4Office or MDU/Campus deployments Remote et he aS IPD4000 Features at IPD4000 Utilizes Net to Net's DSL The Easy WayTM Packet The IP DSL Access Multiplexer is the industry's first .D based Architecture w native IP packet-based DSLAM, supporting the w best of today's leading edge access w technologies. The IPD4000 is engineered for efficient, high-speed IP data transport in a compact, fully fault-tolerant chassismaking it ideal for small to mid-sized deployments. Supporting ADSL, ADSL Loop Bonding, SDSL, SHDSL Loop Bonding, T1/E1, and DS3/E3 access technologies, the IPD4000 is the optimal line aggregation platform for today's advanced IPbased access networks. To allow maximum flexability of network design backhaul connections through the MUM can be single or redundant, modular options available include E1/T1, bonded E1/T1, E3/DS-3, 10/100 Ethernet, Gigabit Ethernet copper and fibre. . DSL The Easy WayTM for plug-and-play configuration and operation 4 Access Modules provide up to 96 DSL or T1/E1 lines Redundant 10/100, GigE, T1/E1, or DS3/E3 Uplink Interface Modules Redundant -48V DC or AC Power Compact NEBS compliant chassis is only 4 Rack Units high and mounts in 19" or 23" equipment racks Embedded web-based management system for easy, platform-independent management or CLI, TFTP and SNMP Management Hot swappable modules This modular chassis allows CLECs/Competitive Operators, ILECs/Incumbents, and IP Network Service Providers to cost effectively offer highspeed broadband Internet, Virtual Private Network, and Remote LAN services. w w .D w t a S a e h U t4 e .c m o IPD4000 w w w .D at Sh a et e 4U . om c IPD4000 Specifications Dimensions 7" (17.8cm)(4 Rack Units) High x 17" (43.2cm) Wide x 18" (46cm) Deep Weight 28 lbs (12.73 kg) (chassis only) Power AC -- Requires External AC to -48 Volt DC Power Converter DC -- Dual -48 Volt DC Terminal Blocks 10 A maximum; 5.5 A typical* *actual power consumption dependent upon chassis configuration Interfaces 5 slot chassis: * 4 Access Module slots * 1 Multiplexer Uplink Module slot Standards Support 802.1Q VLANs 802.1p Tagging 802.3 Ethernet Protocol Support SNMP Regulatory Compliance NEBS: GR-63-CORE, GR-1089-CORE EMC: FCC Part 15; CSA/C108.8; EN55022; EN55024 CE Marking Safety: UL1950, CSA C22.2 No. 950; EN60950 CE Marking Operating Requirements Temperature: -40F to 149F (-40C to 65C) Non-operating temperature: -40F to 158F (-40C to 70C) Humidity: 5% to 95%, non-condensing Altitude: -200ft to 16,600ft (-60m to 5,000m) Specifications subject to change. All registered trademarks are property of the manufacturer 11367 Sunset Hills Road Reston, Va. 20190 lti@ltidata.com URL: www.ltidata.com CONTRACT INFORMATION GSA Schedule # : GS-35F-4803G Expiration Date: September 1, 2007 ECS III: 263-03-D-0556 Expiration Date: November 27, 2012 1-800-677-5050 703-742-4000 703-742-4003 Fax |
Price & Availability of IPD4000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |